microCMA Videos | RBD Instruments

microCMA Compact Auger Analyzer

Alternate Video Links

Get more information...

These links provide hosted microCMA training and tutorial videos where YouTube is not available:

  1. Install the CMA
  2. Install the driver for the microCMA controller
  3. Install microCMA CMapp software
  4. Install 9103 software
  5. Connect the cables
  6. Turn on microCMA Controller
  7. Import Hardware Properties Settings
  8. Emission Offset Calibration
  9. Measure target current with 9103
  10. Turn on electron source / set parameters for 300nA of target (beam) current
  11. Filament warm up
  12. Optimize the wehnelt
  13. Conditioning the electron source and electron multiplier
  14. Dynamic electron multiplier conditioning
  15. Set estimated target current
  16. Elastic Peak Alignment
  17. Electron Multiplier Saturation
  18. Initial offset value
  19. Calibrate AES Linearity
  20. Acquire Survey
  21. Mark and quantify AES peaks
  22. Edit element table
  23. Automatic Diff Smooth feature
  24. Multiplex Acquisition
  25. Sample Charging
  26. Target bias effect on data